Details
Overview :
Arducam 13MP OBISP MIPI camera features onboard ISP (Image Signal Processor), it uses standard Raspberry pi 15pin MIPI CSI-2 interface, and works seamlessly on Raspberry pi, Jetson Nano, and can also be ported to other platforms which compliant to MIPI CSI-2 interface protocol. Application : Cellular phones Digital still cameras PC cameras IoT cameras
Features :
- Resolution: High Resolution
- Shutter Type: Rolling Shutter
- Color Type: Color
- IR Sensitivity: 650nm IR filter, visible light only.
- Output Interface: 2-Lane MIPI CSI-2
- Output Format: YUV422, RGB888
- ISPFeatures: AWB, AE, Flip, Mirror, DeNoise, Gamma, Sharpness, Saturation, Contrast Digital Zoom, Digital Pan/Tilt, Speical Effects etc Platform Support: Raspberry Pi, Jetson Nano or platform with MIPI CSI-2 interface.
Specs :
Sensor Type: 13MP AR1335
Pixel Size: 1.1um x 1.1um
Resolution: 4160×3120
Optical Size: 1/3″
Lens Spec: M12 Low distortion lens,EFL: 4.73mm, FoV(H): 50°, F/NO: 2.2
Max Data Rate: 1.2Gbps/laneFrame Rate: 7fps@4160×3120, 11fps@3264×2448/3840×2160, 24fps@2560×1440, 30fps@1600×1200/1920×1080/640×480/320×240
Responsivity: 4.7k e/lux-sec
SNR(Max): 37dB
Dynamic Range: 69dB
Power Consumption: 270mW
Temperature Range: -10 ~ 70 degrees
Camera Driver: V4L2 Compliant driver for Raspberry Pi and Jetson Nano
Board Size: 38mm x 38mm
Package Contents :
1pcs Arducam 13MP AR1335 High Quality Camera Module with M12 Mount Lens 1pcs 150mm 15pin flex ribbon cable 1pcs 150mm 15pin to 22pin flex ribbon cable
