WiPy 3.0

WiPy 3.0

SiPy

SiPy

FiPy

SKU
Py-5
Brand Reward Points
0
₹5,999.00
In Stock
Topic: Topic

Product Description 

**IMPORTANT NOTE: As of December 2019, all our cellular products have been recalibrated and screened on all 17 bands with a vastly improved RF test system to guarantee more stable connectivity, lower power consumption and faster network attachment.
New specialised equipment and software from Rhode & Schwarz enables us to do more precise measurements during the calibration process. This enhances RF sensitivity and thus signal quality especially in areas with poor cellular coverage while reducing output power during transmit to improve battery performance.

Five networks in one small board;  the Micropython-programmable FiPy takes up the same footprint as our other boards. Featuring WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT-M1 and NB-IoT), the FiPy gives access to global LPWAN networks.

Get on with a board that gives you full flexibility during testing, install, deployment and even later when you want to switch real-time your airtime network provider. You can switch when the time is right for you or set some parameters that will do so automatically.

  • Powerful CPU
  • Five networks: WiFi, BLE, cellular LTE-CAT M1/NB1, LoRa and Sigfox
  • 1KM WiFi range
  • MicroPython enabled
  • Fits in a standard breadboard (with headers)
  • Ultra-low power usage: a fraction compared to other connected microcontrollers

 

Technical Specifications

Model Fipy
Processing Espressif ESP32 SoC
Dual processor and WiFi radio system on chip
Networking processor handles the WiFi connectivity and the IPv6 stack
Main processor is entirely free to run the user application
An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
Interfaces 2 x UART, 2 x SPI, I2C, micro SD card
ANalog channels: 8_12 bit ADCs, 2_8 bit DAC
Timers: 2_64 bit with PWM with up to 16 channels
DMA on all peripherals
GPIO: Up to 22
Hash / Encryption SHA, MD5, DES, AES
WiFi Networking 802.11b/b/n 16mbps
Bluetooth Low energy and classic
RTC Running at 32KHz
Range Node range: Up to 50km
Security & Certifications SSL/TLS support up to 1.2
 WPA Enterprise security
AES encryption engine
Memory RAM: 4MB
Flash Memory: 8MB
GPIO: Up to 22
Hardware floating point acceleration
Python multi-threading
Power Voltage Input: 3.3V  5.5V
3v3 output capable of sourcing up to 400mA
Write Your Own Review
You're reviewing:FiPy
  1. FiPy module x1