Waveshare IMX219-77 Camera, 77° FOV, Applicable for Jetson Nano

Waveshare IMX219-77 Camera, 77° FOV, Applicable for Jetson Nano

Arducam 9MP USB Camera Evaluation Kit - CMOS MT9N001 1/2.3-Inch Color Camera Module with USB Camera Shield

Arducam 9MP USB Camera Evaluation Kit - CMOS MT9N001 1/2.3-Inch Color Camera Module with USB Camera Shield

Arducam IMX135 MIPI 13MP Color Camera Module for Raspberry Pi

SKU
CAM-ARD-0009
Brand Reward Points
0
₹3,189.00
Out of Stock
Topic: Topic

Product Description 

The Arducam 13MP MIPI camera module is mainly designed for Raspberry pi boards and it can be connected directly to RPi’s CSI-2 camera interface without additional hardware.

This camera is based on a 1/3 inch Sony IMX135 image sensor which adopts Exmor-R™ technology to achieve high-speed image capturing with high sensitivity and low noise performance. “RGBW coding” color filter is employed and RGB primary color mosaic is reproduced on-chip. High sensitivity, low dark current, and smear-free features are achieved. It equips an electronic shutter with variable integration time.

This MIPI camera module can be used on other ARM, FPGA, DSP, or Nvidia TX1/TX2 hardware platform as well.

1/3 inch Back-illuminated Sony Exmor-R sensor IMX135
Support 13MP/1080p/720p resolution, RAW8/RAW10 output
CSI-2 serial data output (MIPI 2Lane/4Lane selectable)
2-wire I2C communication for sensor register settings
High sensitivity, low dark current, no smear, excellent anti-blooming characteristics
Image compensation processing functions (defect correction, noise reduction)
RGBW coding (R, G, B, and “White”(achromatic)) color filter and RGB primary color mosaic reproduction on chip
Programmable motorized focus lens, FOV 60 degrees
Support all series Raspberry pi boards

 

Technical Specifications

Model B0163
Camera Driver Arducam
Focus Type Auto, Fixed
Form Factor 40×40
Interface MIPI
IR sensitivity Visible Light
Lens Mount Stock Lens
Resolution 13MP
Sensor Color color
Shutter Type Rolling Shutter
Write Your Own Review
You're reviewing:Arducam IMX135 MIPI 13MP Color Camera Module for Raspberry Pi
  1. 1pcs Arducam IMX135 MIPI 13MP Color Camera Module
  2. 1pcs 150mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
  3. 1pcs 80mm 22pin 0.5mm pitch FPC cable
  4. Note:- This camera and RPI driver doesn’t support ISP functions like AEC/AGC etc., and does not support hardware JPEG/H.264 encoding.